World's #1 Electronic Stencil NanoCoating
Aculon®, an award-winning & proven supplier to the stencil industry, introduces Aculon® NanoClear®, the best-in-class stencil treatment technology that improves print quality, increases efficiency, lowers total costs and enhances printing on ALL stencils, both simple & complex.
How it works
Performance you can trust
Faster release and improved print resolution is achieved as the paste is more easily released from the aperture walls due to the fluxophobic nature of the treatment.
As can be seen in the image the QFN printed with a Nanoclear stencils is drastically improved over uncoated.
NanoClear® is robust and can withstand significant use and abrasion from repeated printing and cleaning cycles. Independent testing proves that NanoClear® offers best-in-class durable performance. The ability of a stencil treated with NanoClear® far outperforms the initial performance of all competitive materials. NanoClear’s ability to repel flux is maintained for over 100,000 abrasion cycles after treatment, while the performance of competitive spray applied material quickly falls off quickly from an already weak, barely fluxophobic starting point.
Application of NanoClear® couldn't be easier. With a NanoClear® dual wipe, water source, and just five minutes of time you can have a stencil that has been properly treated with a robust and high performing coating of NanoClear®. Follow these simple steps:
- Start with a visibly clean & degreased stencil
- Using heavy pressure scrub the Part A cleaner onto the bottom side of the stencil for 60 seconds
- Rinse with running DI (ideal) or tap water until all cleaner is thoroughly removed (Critical step!)
- Dry stencil after rinsing
- Using heavy pressure scrub the Part B treatment onto the bottom side of the stencil for 60 seconds
NanoClear® Completely Coats the Aperture Wall!
In order to quantitatively prove what we have known since launch, that NanoClear® does in fact completely coat the aperture wall we completed a TEM analysis on a range of stencils. As you can see from the results, NanoClear® successfully coats the aperture walls!
NanoClear® is now available in convenient spray form! Our spray kit includes all you need to treat 200 Stencils, including an HVLP sprayer and cleaning solution. Advantages of this application method include:
- Improved Solder Transfer for Fine Pitch Apertures
- Improved Durability
- Proven Technology
- No Cure
- Treat Entire Apertures
- Apply at Stencil House or End User
- No Paste Contamination
- No Chipping/Cracking
NanoClear® Technical Bulletins
Click on the links below to download NanoClear® Technical Bulletins answering some of our most frequently asked questions.
Listen to our Aculon team members walk though each technical bulletin in this video.
NanoClear® Reduces Defects by 50%, Increases Throughput by 35%
Rauland-Borg, an integrated communications technology company that builds nurses call stations and school bell systems, used Aculon’s NanoClear® stencil treatment to reduce SMT defects by 52% and save over $400,000 on a $5000 investment.
Faster release and improved print resolution is achieved as the paste is more easily released from the aperture walls due to the fluxophobic nature of the treatment. The Aculon® NanoClear® Stencil treatments are now 50% stronger due to a greater concentration. As can be seen from the contact angle graph, a treated stencil is 8 times more oil repellent than an untreated stencil even after 100,000 abrasion cycles.
Better Quality Printing
The better quality printing is due to the reduction in bridging as the flux is now repelled from the aperture walls. Tests have shown that treated stencils show significantly reduced the cleaning cycle frequency resulting in both improved print quality and better manufacturing efficiency.
Click on the image below to view larger version